Fotodiox Pro 100mm Filter System Kit: 100mm Filter Holder, 4x 100mm Graduated Filters & Lens Adapter Ring – Compatible with Fotodiox Pro 100x135mm Filters and Cokin Z-Pro (L) Series Filters

Description

In The Box

Specs

Compatibility

Notes

Product Highlights:

• Holds Fotodiox 100mm & Cokin Z-Pro Filters

• Holds up to 2 Rectangular Filters

• Anti-Reflective Black Construction

• Available Sizes – 77mm through 95mm

•
Limited 2-Year Manufacturer Warranty

The Fotodiox 100mm Filter Holder is designed to accommodate multiple filters in order to help create the shot you envision. It can hold up to two rectangular filters, or one rectangular filter and one round filter such as a rotating circular polarizer.

The 100mm Filter System Lens Adapter Ring attaches to the lens and adapts it to fit the Fotodiox Pro 100mm or Cokin Z-Pro Series filter holders. Once the adapter and holder are attached, the lens filters can be slid into the holder and used accordingly. The adapter ring is made from aluminum, which has been anodized for durability.

These graduated filters fit the Cokin Z-Pro (L) Series Filter Holders. It features a soft edge gradation, with +2 stop density on the darkest side, gradually decreasing near the center of the filter allowing for emphasis of foregrounds or backgrounds. Color gradually fades out, so the boundary between the colored and transparent sections of lens will not become apparent even with the lens aperture stopped down. Each Filter comes with a clear protective storage pouch.

Back to Highlights

•
1x Threaded Lens Adapter Ring

•
1x Fotodiox Pro 100mm Filter Holder

•
4x Fotodiox Pro 100mm Graduated Filters

Holder Dimensions

6.1 x 6.1 x 1.1 in (15.5. x 15.5 x 2.8 cm)
0.2 lb (3.2 oz)

Adapter Dimensions

5.1 x 5.1 x 1.4 in (13 x 13 x 3.5 cm)
0.1 lb (2 oz)

Filter Dimensions

5.1 x 6.9 x 0.1 in (13 x 17.4 x 0.3 cm)
0.2 lb (2.6 oz)

Shipping Dimensions

11 x 14 x 1.5 in (28 x 35.6 x 3.8 cm)

1.4 lb (22 oz)

Manufacturer

Fotodiox Inc.

Warranty

Limited 24-Months

•
Fotodiox Pro 100mm Filter Holders

• Cokin Z-Pro (L) Series Filter Holders

• The Fotodiox 100mm filter system works with full frame lenses 18mm and greater; wider than 18mm or if the holder is rotated off center axis will have a very good chance of vignetting.

• The Fotodiox 100mm filter system requires an adapter ring & filter holder (purchased separately) to hold the filter to your lens. The adapter ring screws onto the front of your lens just like a regular camera filter does.

• It is recommended that you remove other filters from the lens before mounting the adapter ring and holder.

• Additional standard filters will increase the possible chance of vignetting, especially on wide angle lenses.

All pictures are for illustration purposes only. Actual product may vary slightly due to ongoing improvements in design.